Book a free inspection ↗Marque · Power, beauty, soul
Curves define an Aston Martin: a long bonnet, the signature grille, muscular rear haunches and, on Volante and Roadster models, a fabric roof. Those curves make film fitting and paint correction exacting work, and UAE heat, sand and highway chips test every surface. BLN Auto Lab looks after the DB11, DB12, Vantage, DBX and DBS in its Sharjah studio, inside and out.
BLN Auto Lab is an independent Sharjah studio that protects and details Aston Martin models, including the DB11, DB12, Vantage, DBX and DBS. For most UAE owners BLN recommends paint protection film on the full front and rear haunches, or full-body film, followed by a ceramic, graphene or borophene coating. Inspection is free, and BLN can arrange collection across the Emirates.
What owners should know
Aston Martin panels curve in two directions at once, especially around the front wings and rear haunches. Film has to be shaped and stretched with care so it lies flat without distortion, with edges wrapped or hidden wherever the panel allows.
The large grille, lower intakes and body vents on most Aston Martins collect sand, tar and insects on fast drives. They are cleaned with soft brushes and rinsed thoroughly, because grit left in a vent is easily dragged across paint later.
Convertible Aston Martins use fabric roofs that face strong UV and fine dust. They are cleaned with products made for fabric, never a paint coating, and sand is brushed away before the roof folds, so it cannot mark the material.
If your car has exposed carbon-fibre parts or a satin paint finish, it needs products and film chosen for that surface. Satin paint must never be machine-polished, and gloss carbon benefits from clear film where stones strike it.
Aston Martin cabins pair leather with Alcantara where specified, and both suffer when sand and skin oils are left in UAE heat. Leather is cleaned and conditioned; Alcantara is brushed and cleaned gently so its nap stays soft.
Model guides
Also in the studio: Vanquish, DB9, Rapide.
Grand tourer (coupé and Volante convertible)
PPF shaped to the curves of the Aston Martin DB11 and DB12, plus paint correction, coatings and Volante roof care. Free inspection in Sharjah.
DB11 & DB12 guide →Sports car (coupé and Roadster)
Protect the Aston Martin Vantage's low nose and wide haunches with PPF, then correct and coat the paint. Coupé and Roadster. Free inspection in Sharjah.
Vantage guide →SUV
Paint protection film, ceramic coating and sand-clearing cabin care for the Aston Martin DBX and DBX707 SUV. Free inspection in Sharjah.
DBX & DBX707 guide →Grand tourer (coupé and Volante convertible)
Full-body PPF, careful correction and borophene coating for the Aston Martin DBS Superleggera, Volante and 770 Ultimate. Free inspection in Sharjah.
DBS guide →The full programme
Film shaped to Aston Martin curves, with edges wrapped where possible; partial coverage carries a 5-year film warranty and full-body a 10-year warranty.
Gloss, satin, matte and colour-shift film fitted panel by panel to Aston Martin bodywork, with edges wrapped into the gaps and the original paint sealed and preserved underneath.
Body kits, lighting upgrades and conversions confirmed for your exact Aston Martin model, with panel gaps and paint finish checked before handover.
Leather and Alcantara work for seats, dashboards, headlinings and door cards, matched to your Aston Martin's colours and stitching.
Wheels, ride height, exhaust, aero and lighting planned as one build for your Aston Martin, with every part confirmed against the exact model and year and the factory components kept and returned.
Ceramic and carbon films keep the cabin cooler without disturbing phone or GPS signals, fitted only after the legal limit is confirmed.
Ceramic protection rated 9H, in 3-year or 5-year systems, that helps rich Aston Martin colours shed dust between hand washes.
Screens with wireless Apple CarPlay, speaker and amplifier upgrades and door sound treatment, installed behind Aston Martin trim with steering-wheel controls, cameras and factory warnings retained.
Graphene coating for a deep, slick gloss on sculpted panels, with up to 7 years of durability once the paint is corrected.
BLN's flagship coating for DBS, DB12 and other cherished Aston Martins, supported by scheduled studio inspections of the finish.
Good to know
Yes, for most owners. The long bonnet, prominent grille and wide rear haunches of an Aston Martin take stone chips on UAE highways, and matching paint on curved panels after a repair is difficult. Full-front film carries a 5-year film warranty, and full-body film a 10-year film warranty (terms vary by tier).
Often, yes. Scuffed bolsters and faded colour can often be repaired and re-dyed, and loose stitching re-sewn. Where a panel is too worn, BLN's upholstery specialists can retrim it in leather or Alcantara matched to the original colour and stitching. The right approach is agreed after the free inspection.
It depends on how long you want the protection to last. BLN's ceramic systems are offered in 3-year and 5-year versions and are 9H-rated. Graphene lasts up to 7 years on corrected paint and gives a slicker surface that sheds dust. Either way, the car should be washed by hand, never in a car-wash tunnel.
Other marques
Your next chapter starts here
Send your Aston Martin's model and year on WhatsApp. BLN Auto Lab will book a free inspection in Sharjah or arrange collection.
Showroom #2, Industrial Area 4, Al Wahdah Street, Sharjah, United Arab Emirates · Saturday to Thursday, 9:00 AM – 9:00 PM